SET UP THE SOUNDBAR
13
|
ENG
SET UP THE SOUNDBAR
CONNECT THE SOUNDBAR TO POWER
1. Connect the power cord to the b port on the back of the soundbar.
2. Plug the other end of the power cord into an AC (mains) power outlet.
The soundbar powers on, and the light bar glows solid amber.
NETWORK STANDBY
The soundbar transitions to network standby when audio has stopped and you have
not pressed any buttons for 20 minutes.
To wake the soundbar from network standby:
• On the remote, press the Power button I or a source button (see page 18).
• Play or resume audio using your mobile device or using the Bose8 app.
NOTE: You can disable the standby timer using the Bose8 app. You can access this
option from the Settings menu.
To Next Page
Loading...
