SOUNDBAR STATUS
39
|
ENG
APPENDIX: SETUP REFERENCE
RESET THE SOUNDBAR
Factory reset clears all source, volume, network, and ADAPTiQ audio calibration
settings from the soundbar and returns it to original factory settings.
1. On the remote, press and hold the Power button I and Skip forward button v for
5 seconds until light bar pulses white twice then fades to black.
The soundbar reboots. When the reset is complete, the light bar glows solid amber.
If you aren’t adding the soundbar to your network, reset is complete. If you are
adding the soundbar to your network, continue with step 2.
2. To set up the soundbar’s network and audio settings:
a. Launch the Bose8 app on your mobile device and add the soundbar to
your network.
b. Run ADAPTiQ audio calibration using the Bose8 app (see page 15).
To Next Page
Loading...
