Bose 850 - Connect a Bose Bass Module Using an Audio Cable

SOUNDBAR STATUS
28
|
ENG
CONNECT BOSE PRODUCTS
CONNECT A BOSE BASS MODULE USING AN
AUDIO CABLE
You can connect the bass module to the soundbar using a 3.5 mm audio cable
(not provided).
If you don’t have a 3.5 mm audio cable (commonly used for headphones and mobile
devices), visit worldwide.Bose.com/Support/SB850 to purchase a 15 ft (4.5 m) cable.
You can also purchase this part at your local electronics store.
1. Connect one end of a 3.5 mm audio cable to the x connector on the
bass module.
2. Connect the other end of the cable to the h connector on the back of
the soundbar.
Bose Bass Module 500 Bose Bass Module 700
3. Check for sound (see page 42).