32
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
C
ARE AND MAINTENANCE
Replacing the CineMate
®
GS
series II remote batteries
Replace both batteries when the remote control stops
operating or its range seems reduced. Alkaline batteries
are recommended.
1. Slide open the battery compartment cover on the
back of the remote.
2. Remove both batteries.
Be sure to dispose of the batteries according to the
regulations in your area.
3. Insert two AA (IEC-R6) 1.5V batteries, or the
equivalent. Match the + and – symbols on the
batteries with the + and – markings inside
the compartment.
4. Slide the battery compartment cover back into place.
Cleaning your speaker system
• You can clean the surface of your speakers,
Acoustimass
®
module, and interface module with
a soft, damp cloth. You can use an ammonia-free
window cleaner on a soft cloth to maintain the finish.
• Do not use any sprays near the speakers. Do not
use any solvents, chemicals, or cleaning solutions
containing alcohol, ammonia, or abrasives.
• Do not allow liquids to spill into any openings.
• The speaker grilles require no special care, although
you may vacuum them carefully, if necessary.
To Next Page
Loading...
