4
SPECIFICATIONS
THD+N (at full rated power)
Crosstalk (below rated power, 1 kHz)
Input Type Line Inputs Mic/Line Input Page Input Aux Input
Number of Input Channels 2 unbalanced 1 balanced 1 balanced 1 unbalanced
Input Connectors Stereo RCA
Combo XLR - 1/4"
(6.5mm) TRS
4-pin Euroblock 1/8" (3.5 mm) TRS
Input Range -10 dBv - +10 dBv -60 dBv - +10 dBv -60 dBv - +10 dBv 0 dBv - +10 dBv
Adjustment Range -20 dB - +20 dB 0 dB - +50 dB 0 dB - +50 dB Fixed
Input Impedance 20 kΩ 2 kΩ 2 kΩ 20 kΩ
Maximum Input Level +10 dBv +10 dBv +10 dBv +10 dBv
Sensitivity NA NA NA 0 dBv
Nominal Input Level 0 dBv -40 dBv -40 dBv 0 dBv
High-Pass Filter Frequency
Input Clip Indicator, Threshold Value
Loudspeaker EQ Preset Selector Options
AC Line Voltage Requirement (+/-10%)
Volume Control User Interface,
Volume Control with A/B Switch User Interface,
Rack Mount Kit
12.2"L x 8.4"W x 1.8"H (310 mm x 214 mm x 45 mm)
1 RU high, half rack wide
Model IZA 250-LZ : 40 Hz
Model IZA 190-HZ: 60 Hz
2 x 50 W @ 4Ω (min ); 2 x 32 W @ 8Ω
Power - blue, Input Clip - red
Power On/Off, Input Select (1/2), Tone Controls (Treble/Bass)
Electrical Specifications
Model IZA 250-LZ: 2 x 50 W @ 4Ω; 2 x 32 W @ 8Ω
Model IZA 190-HZ: 1 x 90W @ 70/100V
Amplifier Mode DIP Switches, Loudspeaker EQ Preset Selector
Integrated Loudspeaker DSP
Front Panel Controls and Indicators
Audio Performance Specifications
High-Pass Filter (HPF), FreeSpace DS 16 and DS 40 loudspeakers
Model IZA 250-LZ: 40 Hz - 18 kHz (+0/-3 dB, @ 1W reference 1 kHz)
Model IZA 190-HZ: 60 Hz - 18 kHz (+0/-3 dB, @ 1W reference 1 kHz)
Page/Mic (Normal/Bypass Master)
Output (Mono/Stereo)
Page/Mic (Mix/Duck)
Aux Out (EQ/Flat)
Input Gain, Output Levels
Remote input for Volume Control (with A/B Select) User Interface,
Mute input for amplifier muting via contact closure
100V AC - 240V AC (50/60 Hz)