14
SETUP
ItalianoSvenska DeutschNederlands EnglishFrançais Español
1. Insert one end of the HDMI cable into the HDMI
connector on your TV.
Match the wide side of the plug to the wide side
of the connector.
2. Insert the other end of this cable into the HDMI
connector on the media center.
Make sure the Bose
®
logo shows as you insert the
plug.
3. Continue with on page 17.
Note: If you make this HDMI connection, you do not
need the supplied yellow Composite video cable to make
any connections.
DO NOT use either of the two ONLY PASS-THROUGH
connectors on the back of the media center for video from
a component.Neither S-Video nor Composite signals can
pass through the HDMI cable to the TV.
To Next Page
Loading...
Need help?
General
