15
SETUP
Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
1. Notice the yellow plug at each end of the
Composite video cable.
Note: There may be other kinds of video connectors on
your TV that offer higher resolution than Composite.
To use either S-Video or Component connectors, you
need the appropriate cables. These cables are available
at most electronics stores.
2. Plug the Composite video cable into the yellow
VIDEO IN connector on your TV.
Note: If there is just one Composite Video In connector
on your TV, it may be in use already for another video
component. You can disconnect that component from
the TV, and see “To use video pass through” on page 21.
To Next Page
Loading...
Need help?
General
