22 - English
Care and Maintenance
Problem What to do
Right and left
stereo chan-
nels are heard
on the wrong
speakers
Confirm speaker wire connections:
• Connect speaker wires from the amplifier’s SPEAKERS OUT + L -
connector to your left speaker.
• Connect speaker wires from the amplifier’s SPEAKERS OUT + R -
connector to your right speaker.
Bass or treble
is weak
Check speaker wire connections. Confirm that the individual wires are
connected + to + and – to –.
Interference • Firmly insert the speaker wires into the terminals on the back of the
speakers and on the amplifier’s connector panel. Confirm that no
individual wires are touching across terminals.
• Keep the system away from metal objects, other audio/video compo-
nents, and direct heat sources.
Overload protection
The amplifier’s overload protection feature automatically reduces maximum power
output to prevent the amplifier from getting too hot. This may occur when the
amplifier plays at high volume for a long duration or if it is installed in a location
with limited ventilation. Ensure the system is installed in a well-ventilated area. Full
maximum output automatically returns as the system cools down.
Cleaning
CAUTION: Disconnect the power cord from the AC (mains) power outlet before
cleaning.
To clean the amplifier, use only a soft, dry cloth to remove dust from the outside of
the enclosure. You may use a brush attachment on a vacuum cleaner to clean the
hard-to-reach areas. DO NOT use any solvents, chemicals or cleaning solutions
containing alcohol, ammonia or abrasives.
Customer service
For additional help using the system:
• Visit SoundTouch.com
Contact Bose customer service. Refer to the quick start guide in the carton for
contact information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
