EasyManua.ls Logo

Bose SoundTouch SA-5 - Limited Warranty Information; Technical Information; Input Sensitivity

Bose SoundTouch SA-5
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 23
Care and Maintenance
Limited warranty information
Your SoundTouch
system is covered by a limited warranty. Details of the limited
warranty are provided on the quick start guide in the carton. Please refer to the
guide for instructions on how to obtain warranty service and register your product.
Failure to register will not affect your limited warranty rights.
The warranty information provided with this product does not apply in
Australia and New Zealand. See our website at www.bose.com.au/warranty or
www.bose.co.nz/warranty for details of the Australia and New Zealand warranty.
Technical information
Features
Bose
®
proprietary digital signal processing technology
Built-in digital volume control
Thermal overload protection
Dimensions and Weight
7
1
/
4
in. wide x 12 in. deep x 3 in. high (18.4 cm x 30.0 cm x 7.7 cm)
3.3 lb (1.5 kg)
Power rating
100-240V 50/60 Hz, 400W
Input sensitivity
3.5 mm input: 1Vrms
RCA inputs: 2Vrms
Signal to Noise ratio (S/N)
>100 dB
Output power (continuous average)
100W / channel minimum into 8 ohms, from 20 Hz to 20 kHz, with no more than
0.5% THD.
Temperature range
32° F to 104° F (0° C to 40° C)

Table of Contents

Other manuals for Bose SoundTouch SA-5

Related product manuals