Bose Wave music system Supplementary Guide

8
WALL INSTALLATION
EnglishEspañolItaliano DeutschFrançaisNederlandsKorean ThaiArabic S. Chin
Use the proper mounting hardware and drill hole size for your wall surface: A. wallboard, B.
wood or metal studs, or C. masonry:
Wall construction Supplied hardware to use Type of drill bit Hole size
A
Wallboard (sheetrock) !
3
/
8
" or thicker
See Figure 10A for
details on use.
Do NOT mount to wood
paneling.
Toggle bolts and wings
#10-24 x 2½"
#10-24"
Do NOT use sheet metal screws.
½" (13 mm)
Spade bit
½"
(13 mm)
B
Wood or metal studs
See Figure 10B for
details on use.
Sheet metal screws
#10-16 x 1½"
3
/
32
" (2.5 mm)
Twist bit
3
/
32
"
(2.5 mm)
C
Masonry
See Figure 10C for
details on use.
Screw anchors !
and sheet metal screws
#10-16 x 1½"
#10
3
/
8
" (10 mm)
Masonry bit
3
/
8
"
(10 mm)
CAUTION:
If your mounting surface is not of the type or grade specified above, it may not be
strong enough. Mounting there can damage your wall or cause the bracket to fall. Use a different
surface for mounting the bracket.

Bose Wave music system Specifications

General

Sound output mode	Stereo
Radio tuner	AM/FM
Clock	Yes
Headphone Jack	Yes
Media type	CD