10
Maximizing the volume levels of data recorded to the tracks (Normalize)
7. Use [CURSOR] to move the cursor to “GO,” then press
[ENTER].
“Now Converting...” appears in the screen, and
normalization begins. The process is finished when
“Complete!” is displayed.
8. If you don’t like the results of the normalization, you
can undo them.
“Canceling a recording or editing procedure—Undo/Redo”;
p. 75 in the Owner’s Manual
9. Save the song to store the results of the normalization
in memory.
“Saving a song (Song Store)”; p. 80 in the Owner’s Manual
To Next Page
Loading...
