Boss BR-1180CD - Change Drum Kits During Rhythm Recording

14
Changing drum kits while recording
rhythm patterns with Realtime Recording
Ver.2 now allows switching of drum kits during Realtime
Recording of rhythm patterns.
This lets you use Realtime Recording with the drum kits you
want to use in playing back rhythm patterns.
1. Bring up the Realtime Recording Standby screen.
“Creating rhythm patterns using Realtime Recording”; p. 86
in the Owner’s Manual
2. Use [CURSOR] to move the cursor to “DRUMKIT,”
then select the drum kit you want to be used in
Realtime Recording with the TIME/VALUE dial.
* The drum kits set at this time are only used for recording; they
are not stored to the rhythm patterns (you cannot set the
individual drum kits as such to the rhythm patterns
themselves).
* At this time, you can use REC TRACK [1]–[9/10] and [V-
TRACK] to check the drum tones. For more on the
correspondence between the track buttons and drum tones,
refer to the table of correspondence between the track buttons
and drum sounds on p. 87 in the Owner’s Manual.
3. Begin Realtime Recording.