Boss Modulation MD-200 - Attaching the Rubber Feet; Main Specifications

Appendix
18
Attaching the Rubber Feet
You can attach the rubber feet (included) if necessary.
Attach them in the locations shown in the illustration.
* Using the unit without rubber feet may damage the oor.
Main Specications
BOSS MD-200: Modulation
Power Supply
Alkaline battery (AA, LR6) x 3,
AC adaptor (sold separately)
Current Draw
225 mA
Expected Battery
Life Under
Continuous Use
Alkaline: Approx. 4 Hours
* These gures will vary depending on the actual
conditions of use.
Dimensions
101 (W) x 138 (D) x 63 (H) mm / 4 (W) x 5-7/16 (D) x 2-1/2
(H) inches
101 (W) x 138 (D) x 65 (H) mm / 4 (W) x 5-7/16 (D) x 2-9/16
(H) inches (including rubber foot)
Weight
680 g / 1 lb 8 oz (including batteries)
Accessories
Owner’s Manual
Leaet “USING THE UNIT SAFELY”
Alkaline battery (AA, LR6) x 3
Rubber foot x 4
Options
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35
* This document explains the specications of the product at the time
that the document was issued. For the latest information, refer to the
Roland website.