Boss Modulation MD-200 - Overall Settings (Menu); Basic Operation; Assigning functions to external pedals

11
Overall Settings (Menu)
Basic Operation
1. Press the [TAP DIVISION] button and
[MEMORY] button simultaneously.
You enter menu mode.
2. Turn the [RATE] knob to select a parameter, and
then press the [RATE] knob.
The value is displayed.
3. Turn the [RATE] knob to edit the value.
4. Press the [RATE] knob.
5. Press the [TAP DIVISION] button and
[MEMORY] button simultaneously.
You exit menu mode.
Assigning functions to external pedals
You can connect footswitches (sold separately: FS-5U, FS-6, FS-7)
to the CTL 1, 2/EXP jack, and use them to tap-input the rate or to
switch memories.
Use the menu items “C1F” or “C2F” to make these settings (p.
12).
FS-5U FS-6, FS-7
CTL 2 CTL 1
CTL 2 CTL 1
CTL 2
CTL 1
CTL 1
FS-5U×2
FS-5U
FS-6, FS-7