Boss Modulation MD-200 - Mode Knob

Panel Descriptions
3
4 [E. LEVEL] knob
Adjusts the volume of the eect sound.
In some modes, this adjusts the balance between eect
sound and direct sound.
5 Mode knob
Selects the eect.
Mode Explanation
CHORUS (CHO)
Chorus sound using cutting-edge BOSS
technology.
CE-1 CHORUS (CE1)
A chorus sound that models the CE-1.
FLANGER (FLG)
Produces a anging eect.
PHASER (PHS)
Produces a phase eect.
Mode Explanation
VINTAGE PHASER
(VPH)
Models the MXR PHASE90 produced
during the 1970s.
CLASSIC VIBE (CVB)
Models the Uni-Vibe.
VIBRATO (VIB)
Vibrato with a unique eect.
TREMOLO (TRM)
An eect that cyclically changes the
volume.
ROTARY (ROT)
Realistically reproduces the sound of a
rotary speaker.
AUTO WAH (AWH)
Cyclically modulates a lter to
automatically create a wah eect.
SLICER (SLI)
Cyclically cuts the sound to create a
variety of slice patterns.
OVERTONE (OVT)
Adds new overtones to create
resonance and depth not present in
the original sound.
6 PARAM [1]–[3] knob
Set the parameters. The parameters dier depending on the mode.
Mode PARAM 1 PARAM 2 PARAM 3
CHORUS (CHO)
SWT
(SWEETNESS)
Higher values create a more
enveloping sound.
LOC (LOW CUT FREQUENCY)
Adjusts the tonal character of the
low-frequency region.
HIC (HIGH CUT FREQUENCY)
Adjusts the tonal character of the
high-frequency region.
CE-1 CHORUS (CE1)
TYP
(TYPE)
CHO: Chorus sound of the CE-1
VIB: Vibrato sound of the CE-1
LO (LOW LEVEL)
Adjusts the tonal character of the
low-frequency region.
HI (HIGH LEVEL)
Adjusts the tonal character of the
high-frequency region.