BOXLIGHT Projector User Manual

1
Table of Contents
1. Introduction···················································································· 2
2. Features ··························································································· 2
3. Operation Notice ·········································································· 3
4. Projector Components ······························································ 4
4.1 Control Panel 4
5. Accessories···················································································· 7
5.1 Remote Control 8
5.2 Remote Control Functions 9
6. Operation guide·········································································· 11
6.1 Connecting component 11
6.2 Connecting the projector to a computer 12
6.3 Connecting the projector to a Video Source 12
6.4 Turning on the projector 13
6.5 Basic Image Adjustment 13
6.6 Turning off the projector 13
6.7 Adjusting the projected image height 14
6.8 Adjusting the image focus and zoom 15
7. OSD menu·····················································································16
7.1 Image (Computer mode) 16
7.2 Image (Video mode) 17
7.3 Display (Computer mode) 18
7.4 Display (Video mode) 20
7.5 Audio 22
7.6 Management 23
7.7 Language 24
8. Maintenance and service························································25
8.1 Replacing the lamp module 25
8.2 Cleaning the projector lens 26
9. Appendix························································································27
9.1 Common problems and solutions 27
9.2 Distance ratio of screen and projector 29
9.3 Specifications 30

BOXLIGHT Projector Specifications

General

Brand	BOXLIGHT
Model	Projector
Category	Projector
Language	English

Summary

Safety and Operation Notices

Safety Warnings and Precautions

Lists critical safety instructions to prevent injury, electrical shock, or equipment damage during operation.

Operation Guide

Connecting Components

Illustrates and describes how to connect various external devices like computers and video sources to the projector.

Connecting to a Computer

Step-by-step instructions for connecting the projector to a computer via VGA, USB, and audio cables.

Connecting to Video Sources

Turning On the Projector

Details the procedure for powering on the projector, including warm-up and input detection.

Basic Image Adjustment

Guides users through initial adjustments for image size, focus, height, and OSD menu settings.

Turning Off the Projector

Describes the correct procedure for shutting down the projector, including the necessary cool-down period.

Adjusting Image Focus and Zoom

OSD Menu Settings

Image Settings (Computer Mode)

Image Settings (Video Mode)

Display Settings (Computer Mode)

Display Settings (Video Mode)

Maintenance and Service

Replacing Lamp Module

Provides detailed steps and safety precautions for replacing the projector's lamp module when it reaches end-of-life.