5
Power LED (Indicator light)
•When power is applied to the projector, the Power LED blinks. Press the
Power button to turn the projector on. When the projector is on, the Power
LED is lit constantly.
Temp LED (Indicator light)
•When there is a fan malfunction, a fan error message is displayed on the
screen, the Temp LED lights and the projector shuts down.
•When the projector internal temperature is too high, a temperature error
message is displayed, the Temp LED blinks and the projector shuts down.
Lamp LED (Indicator light)
•Lamp LED will turn on automatically when lamp is on. Lamp LED will turn
off automatically when the lamp is off.
Power
(On/Standby)
•Turns the projector power off and on.
•Refer to “Starting and turning off the projector” on Page 13.
Menu (OSD menu)
•Press to display or hide the OSD menu.
•The OSD menu closes automatically after 20 sec of inactivity.
Source (Signal source)
•Steps through the input sources in the following order: Analog RGB, Analog
Y Pb Pr, Digital RGB, Composite Video, S-Video and Component Video.
Auto/Enter (confirm/Sync)
•When using the OSD menu, this button is used to select menu functions.
•When the OSD menu is not displayed, this button activates the Sync function.
To Next Page
Loading...
