Bpt TH 400 - Page 14

14
GB
T3
T2
T1
ON
048121620
R
T
12
3
4
56
7
Fig. 33
T3
T2
T1
ON
048121620
R
T
12
3
4
56
7
Fig. 32
T3
T2
T1
ON
048121620
R
T
12
3
4
56
7
Fig. 31
T3
T2
T1
ON
048121620
T
R
12
3
4
56
7
Fig. 30
5.2 - Set the value of the required
temperature by pressing or .
5.3 - Press the button once,
figure 28.
The display shows the wording
h01 instead of the actual time.
5.4 - Press the button or
until you reach the number of
hours required, which can range
from 1 to 99, figure 29.
The hours are counted including the
hour during which the program-
ming option is used (so the remain-
der of the hour when the setting is
made counts as a whole hour).
Note. To return to AUTOMATIC
mode before the expiry of the pro-
grammed interval, press the
button, figure 30.
Programming in days
5.5 - Make sure that you are in
MANUAL mode.
5.6 - Set the value of the required
temperature by pressing or .
5.7 - Press the button twice,
figure 31.
The display shows the wording
d01 instead of the actual time.
5.8 - Press the button or
until you reach the number of days
required, which can range from 1
to 99. The days are counted inclu-
ding the day during which the pro-
gramming option is used (so the
remainder of the day when the set-
ting is made counts as a whole
day), figure 32.
Note. To return to AUTOMATIC
mode before the expiry of the pro-
TH/400.01 ITF 2407-9122 04.06 3-05-2006 15:56 Pagina 14