Bpt TH 400 - Standard Pre-set Programs; Heating Program Defaults; Cooling Program Defaults

12
GB
T3
T2
T1
ON
048121620
R
T
12
3
4
56
7
Fig. 26
T3
T2
T1
ON
048121620
1
2
3
4
5
6
7
T3
T2
T1
ON
048121620
1
2
3
4
5
6
7
Fig. 23 Fig. 24
4 - STANDARD
PROGRAMS
IN PERMANENT
MEMORY
4.1 - HEATING PROGRAM
To facilitate the user, the THERMO-
PROGRAM is provided with a per-
manently-memorized heating pro-
gram which maintains the tempe-
rature conditions as illustrated in
figure 23 from Monday to Friday
(1÷5) and as illustrated in figure 24
from Saturday to Sunday (6 and
7), in which the temperature levels
are set as follows:
T1 16 °C
T2 18 °C
T3 20 °C
4.2 - COOLING PROGRAM
The permanently-memorized cool-
ing program maintains the tempe-
rature conditions illustrated in figu-
re 25, where the temperature levels
are set as follows:
T1 24 °C
T2 26 °C
T3 28 °C
If the permanently-stored pro-
grams coincide with your needs,
T3
T2
T1
ON
048121620
1
2
3
4
5
6
7
Fig. 25
the THERMOPROGRAM needs no
further explanation and is ready to
operate immediately.
To create personalized programs,
on the other hand, proceed as
explained in paragraphs 6, 7 and
8.
TH/400.01 ITF 2407-9122 04.06 3-05-2006 15:56 Pagina 12