_____________________________________________________________________________________________________
Printing Labels 47
There are two special commands used by the Printer, the STX S (Recall Global
Data) and the STX T (Print Date and Time) commands. Unlike the other Label
Format Commands, which follow the STX L command, these special
commands are entered directly into the data field.
Character Description
<STX>S Recall global data and place in field.
<STX>T Print time and date.
Table 4-5 Special Label Formatting Commands
Bitmapped font loading commands are usually generated by font creation
software. However, the assigned font ID number command must be sent to the
Printer before the font file. Refer to Table 4-6 for the font loading command
characters.
The downloaded font will be stored in the "default" module, (see STX X).
Command
Character
Description Format
*c###D Assign Font ID Number
<ESC>*c###D
### = font ID Number 100 to 999
)s###W Font Descripton
<ESC>)s#W
# = Bytes of Font Descriptor Data
*c###E Character Code
<ESC>*c###E
# = ASCII Value of Character
(s#W Character Download Data
<ESC>(s###Wnn...n
# = Bytes of Bit-mapped Data
nn..n = Bit mapped data
Table 4-6 Bitmapped Font Loading Commands
To Next Page
Loading...
Need help?
General
