Manual for BL-819, BL-830, BL-875
V6.1
© Copyright Brainboxes Ltd Page 14 of 40
1.9.10. Interactive Menu
Some RS-232 devices (GPS devices for example) emit a continuous stream of data regardless of whether a cable is connected.
When there is no Bluetooth connection, this data (from the RS-232 device) will be interpreted by the Adapter as commands to
(or interaction with) the menu and ultimately change settings (such as baud rate) that render the Adapter inoperable.
Selecting “off” for this setting will stop the Adapter being unwontedly re-configured in this manner. Unfortunately, this will
also disable all the functionality required for this configuration application to interact with this product.
If you inadvertently select “off” for this setting, the menu/command interface (and thus the operation of the configuration
application on this device) will only be re-enabled by a long reset as documented below.
WARNING: Use with care: Selecting the “off” option of this feature will render further configuration impossible if set as a
default setting.
To Next Page
Loading...
Need help?
General
