Manual for BL-819, BL-830, BL-875
V6.1
© Copyright Brainboxes Ltd Page 27 of 40
device was shipped with. The user should also remember that adapter is likely to need its parameters re-configuring to ensure
communications can be re-established with either the local serial device, or remote Bluetooth device.
Long press
• Hold down the reset button for about 20 seconds with the power on
• Power cycle the device
• Access the device using baud 9600,n,1
Double tap
• Hold the button for about 3-5 seconds
• Repeat
• Access the device using baud 9600,n,1
Upgrading your device
If you have installed the Configuration Utility already, the Upgrade application will also have installed and a shortcut will be
placed onto your desktop. Otherwise browse the CD, navigate to the: 83CDBLUETOOTH3\Bluetooth Solutions
3.3\Software\BL-819\Configuration Utility directory, and run the “Setup.exe” application. Follow the onscreen instructions
to install the application. This will create an entry in your start menu as well as a desktop shortcut.
Run the application by selecting it from the “Start” menu or by running it from the shortcut on your desktop.
This is the first window which appears. The version of
the application is displayed in the lower right corner
of the screen.
Click “Next”
To Next Page
Loading...
Need help?
General
