Manual for BL-819, BL-830, BL-875
V6.1
© Copyright Brainboxes Ltd Page 34 of 40
1.19. Server: Connecting to adapter from a remote Bluetooth device
Connecting to your adapter will vary depending on your application, but will usually consist of 3 Steps:
1 – Configuring the adapter’s communications parameters.
2 – Physically connecting adapter to your device.
3 – Connecting to adapter from a remote device via Bluetooth and transferring data.
There are many different scenarios whereby a connection can be made to an adapter and consequently its attached device.
The application scenarios will also depend on what sort of device you have attached to the adapter.
1.19.1. Configure and connect the adapter
Configure the communications and Bluetooth parameters of the Adapter as described in the above sections and physically
connect it to your RS-232 device.
1.19.2. Bluetooth Enable your PC
Any PC based Bluetooth device could be used, but for this example we have used a Brainboxes USB adapter and Bluetooth
software for Windows 8.1.
1.19.3. Discover the device
Open Control Panel and go to the Devices and Printers section.
Select ‘Add a device’ and a window will appear which will
automatically search for local Bluetooth devices.
Assuming that your adapter is switched on, in radio range and set
to discoverable you should see it displayed (perhaps alongside
other Bluetooth devices in range) in this window.
Double click on the Brainboxes adapter to begin the pairing
process.
1.19.4. Secure the relationship
Once the adapter has been selected you will be asked to enter
the pin code. The default pin code for the BL-819 and BL-830
adapters is: 1234
When you have entered the pin in the text field, press next.
To Next Page
Loading...
Need help?
General
