Branson 2100 - Hazard Light Does Not Light; Turn Signal Light Does Not Light

ELECTRIC SYSTEM
KUKJE MACHINERY CO., LTD.
166
Symptom Probable Cause Solution Reference
Fuse blown(10A) Replace
Bulb blown Replace
Wiring harness disconnected or improperly
connected
Repair or Replace
Flasher unit defective Replace
Hazard Light Does
Not Light
Hazard switch defective Replace
Bulb blown Replace Hazard Indicator
Lamp Does Not
Light
Wiring harness disconnected or improperly
connected
Replace
Hazard Light Does
Not Flicker
Flasher unit defective
Repair or Replace
Fuse blown(20A) Replace
Bulb blown Replace
Wiring harness disconnected or improperly
connected
Repair or Replace
Flasher unit defective Replace
Turn Signal Light
Does Not Light
Combination switch defective Replace
Bulb blown Replace Wiring harness
disconnected or
improperly
Wiring harness disconnected or improperly
connected (between combination switch R or L
terminal and panel board)
Repair or Replace
Flasher unit defective Replace Turn Signal Light
Does Not Flicker
Combination switch defective Replace
7. TROUBLE SHOOTING