21 Operating Your Ultrasonic Bath
SONICS Press to activate ultrasonics. If running in Timed Mode, a
timer will begin to count down and ultrasonics will stop at
0 minutes. In Constant Sonics Mode ( and “- -” on the
display), timer has no function.
Press key again to deactivate ultrasonics.
If running in Timed Mode, press and keys to adjust
the ultrasonic cycle time (adjustable from 1 to 99 minutes).
DEGAS Press to degas the solution or to run a degas application. A
default timer of 5 minutes will begin to count down and
degassing will stop at 0 minutes.
Press key again to stop degassing the solution.
During a degas cycle, press and keys to adjust the
degas cycle time (adjustable from 1 to 99 minutes).
NOTE: Refer to page 41 for information on degassing.
Control Function
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30
To Next Page
Loading...
