Branson 3015r - Mounting Flange; Flywheel; Crank Pulley

2
-
90
42hW-201601
CHAPTER 2 ENGINE 3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
6.4.16 CRANK PULLEY
Assemble the crank pulley and washer.
Tighten the bolt to crank pulley. (Tightening
torque: 11.5 kg•m)
1.
2.
K25W275A
6.4.15 FLYWHEEL
Assemble the ywheel.
Assemble the flywheel bolt within the factory
specication and follow procedure.
A. Tighten the bolt. (Tightening torque: 3.0 kg•m)
B. And then tighten the bolt again to hold the
ywheel. (Tightening torque: 9.0 kg•m)
1.
2.
K25W272A
6.4.14 MOUNTING FLANGE
Assemble the mounting ange.
Tighten the bolts to hold mounting flange.
(Tightening torque: 2.7 kg•m)
1.
2.
K25W273A