Branson 3015r - Clutch Disassembly; Park the Tractor on Level Ground and Apply the Hand; Clutch Housing Removal; Disassembly

CHAPTER 3 CLUTCH
3
-
8
3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
42hW-201601
3. DISASSEMBLY
3.1 CLUTCH HOUSING REMOVAL
1. Park the tractor on level ground and apply the hand
brake.
2. Disconnect the negative battery cable.
3. Drain the transmission uid.
4. Remove the hood and propeller shaft.
5. Disconnect the hydraulic hose, wiring connector
and various cables between the vehicle body
and engine.
6. Place a stand under the clutch housing and a
portable jack under the engine oil pan.
7. Remove all the related parts, including the fuel
hose and main wiring connector, between the
engine and vehicle body.
8. Unscrew the mounting bolt (1) from the cutch
housing and engine mounting ange. Then, push
the front axle section to separate it from the
clutch housing.
9. �or more detailed disassembly procedures, refer �or more detailed disassembly procedures, refer�or more detailed disassembly procedures, refer
to the instructions for engine removal in Chapter 2.
ITEM TORQUE VALUE
M14 nut (10.9T) 16.5 kg.m (119.34 lbf.ft)
M14 bolt (10.9T) 16.5 kg.m (119.34 lbf.ft)
3.2 CLUTCH DISASSEMBLY
1. Unscrew the clutch assembly mounting bolts (1)
from the engine flywheel to remove the clutch
cover (2).
K20W303A
ITEM
TORQUE VALUE
Clutch assembly
mounting bolt
2.3 - 2.6 kg.m
(17 - 19 lbf.ft)
2. Remove the clutch disc.
K20W304A
K42W301A