Manual Change Information
At Branson, we strive to maintain our position as the leader in ultrasonic
plastics joining, cleaning and related technologies by continually
improving circuits and components in our equipment. These
improvements are incorporated as soon as they are developed and
thoroughly tested.
Information concerning any improvements will be added to the
appropriate manual section(s) at the next printing. Therefore, when
requesting service assistance for specific units, refer to the printing date
which appears in the lower right corner of this page.
Branson Ultrasonics Corporation Equipment is manufactured under
one or more of the following U.S. patents:
3,441,875
3,608,648
3,679,526
3,752,381
3,833,163
3,939,033
3,469,221
3,614,484
3,697,357
3,764,442
3,848,792
3,945,618
3,573,781
3,619,671
3,698,408
3,785,910
3,852,144
3,946,280
3,586,122
3,628,071
3,699,719
3,790,059
3,863,826
3,955,740
3,586,589
3,645,504
3,721,833
3,791,569 3,873,859
4,006,707
3,601,084
3,649,420
3,734,805
3,808,080
3,917,146
4,016,436
3,602,421
3,666,599
3,737,361
3,813,006
3,920,504
4,313,778
3,607,580
3,666,602
3,752,380
3,813,021
3,921,015
Processes described in this publication are covered by one or more
of the following U.S. patents:
3,401,446 3,577,292 3,765,973 3,899,116 3,969,544 3,981,759
3,563,822 3,595,453 3,893,223 3,966,520 3,972,758
© BRANSON ULTRASONICS CORPORATION
11/90
Printed in U.S.A
Loctite® is a registered trademark of Loctite Corporation, Newington, CT 06111.
To Next Page
Loading...
