Limited Warranty
Each product manufactured by Branson is guaranteed to be free from
defects in workmanship and material for thirty six (36) months from the
date of invoice. This warranty does not apply to any product which has
been subjected to misuse, misapplication, neglect (including without
limitation, inadequate maintenance), accident, or improper installation,
modification, adjustment or repair, or use with an improperly tuned horn.
Products supplied by Seller, but manufactured by others are warranted
only to the extent of the manufacturer's warranty. The guarantee period
for certain product lines will be extended at the discretion of Branson.
This warranty does not apply to horn surface wear, which is a normal
occurrence and develops over time in the operation of ultrasonic
equipment.
Metal to metal contact applications are to be limited to less than 1.5
seconds exposure time for 20 kHz welding equipment.
The warranty of converters is limited to a one-time, no-charge replacement
within the guarantee period.
Disclaimer of Warranty
The foregoing warranty constitutes Seller's only warranty in connection
with this sale, and is in lieu of all other warranties expressed or implied,
written or oral: THERE ARE NO IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR
PURPOSE.
Exclusive Remedy
SELLER'S LIABILITY SHALL BE LIMITED TO REPAIRING OR REPLACING
THE PRODUCT FOUND BY SELLER TO BE DEFECTIVE OR
NON-CONFORMING, OR, AT SELLER'S OPTION, TO REFUNDING THE
PURCHASE PRICE OF SUCH PRODUCT. At Seller's request, Buyer shall
send, at Buyer's expense, any allegedly defective product to the factory
where it was manufactured. The remedy set forth above is exclusive. The
repair or replacement of the product, or refund of the purchase price,
constitutes fulfillment of all liabilities of Seller to Buyer under the
warranties above-mentioned, whether based on contract, negligence of
any kind, strict liability or tort, or otherwise with respect to or arising out
of product furnished hereunder.
Warranty
To Next Page
Loading...
