Safety First
2-9Digital Compact
BRANSON Ultrasonics Digital Compact Version 22.08.2002
2.9.2 Installation and Maintenance Work
If this operating manual requires you to remove safety systems for
installation or maintenance work, be sure to reinstall them after finish-
ing work. Only remove safety devices if this is necessary for the instal-
lation or maintenance work. This applies in particular to covers and
ground cables.
DANGER
Prior to installation and maintenance work you must observe the
following disconnecting procedures to isolate the electrical sup-
ply of all components:
- de-energise the equipment,
- disconnect mains plug and
- take precautions to prevent inadvertent re-connection.
NOTE!
Further potential danger when working with and on the unit is
described in the respective sections on these processes.
To Next Page
Loading...
