EasyManua.ls Logo

Branson DC 480 - Cleaning internal Parts of the Power Supply

Branson DC 480
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
8-2 Digital Compact
8.2 Cleaning internal Parts of the Power Supply
In case the systems are force-ventilated check ventilators for contami-
nation at regular intervals.
Depending on the degree of contamination clean the inner parts of the
power supply at regular intervals using compressed air. If the module is
operated in a dusty environment cleaning might be required weekly. In
a reasonably clean environment cleaning every 6 month should be suf-
ficient.
DANGER!
HIGH VOLTAGE!
Contact with live parts causes electrocution.
Disconnect mains supply.
Wait 5 minutes before opening the unit for capacitors to
discharge.
Take great care when cleaning using compressed air in order not to
damage components.
8.3 Disassembly and Disposal
The power supply can be disassembled into various components. The
components must be disposed of in accordance with the relevant envi-
ronment protection regulations.
STOP

Table of Contents

Related product manuals