Startup
5-1
Digital Compact
2002 BRANSON Ultrasonics Digital Compact Version22.08.2002
5Startup
5.1 Transport and Packaging
The ultrasonic power supply units are carefully inspected and packed
before dispatch. However damage during transport is not impossible.
Inspection on Receipt
1. Remove the packing of the components immediately after delivery.
2. Check whether all parts are complete according to the delivery
note.
3. Check controls and surfaces for damage (visual inspection).
4. Always check to see if any component has loosened inside the dra-
wer during transport.
NOTE!
In case you detect any damage to the unit, please contact the for-
warding agent immediately. Retain the packing material.
Packing for Return
If possible, please use the original packing and packing material.
In case of questions concerning packing and transport safety, please
contact BRANSON Ultrasonics.
Storage
If no special agreements have been made concerning packing and
storage, the unit must be transported and stored with or without
packing under “normal“ conditions, i. e. in a closed dry room at tempe-
ratures between 5 °C and 45 °C.
To Next Page
Loading...
