Maintenance
8-1Digital Compact
2002 BRANSON Ultrasonics Digital Compact Version 22.08.2002
8 Maintenance
DANGER!
Prior to cleaning and maintenance work, the welding system must
be depressurised and disconnected from the mains. De-energise
the equipment and disconnect from mains supply.
Please observe the following hints to ensure long and trouble-free ope-
ration
:
8.1 Cleaning the Housing
• Depending on the degree of contamination clean the housing of the
controller at regular intervals using a clean dry cloth.
• Never use solvents.
• Never use alkaline agents or agents containing acid or scouring
particles.
STOP
To Next Page
Loading...
