Branson DC 480 - PC Connector (J4, Front)

Electrical Connections
6-2
Digital Compact
6.1 PC Connector (J4, Front)
Using a serial cable, you can connect a PC to the JF connector (9-pin
SUB-D socket). If you install the required software available at BRAN-
SON Ultrasonics, you can
• save the data of each weld cycle to a file,
• display the data graphically (weld graph),
• change the data for the weld process and transfer them to the
module.
Tab. 6-2 Pin assignment of J4 socket (9 pins)
Pin Assignment
2RxD
3TxD
5GND