Branson F36r - Page 357

6
-
79
42hW-201601
CHAPTER 6 HYDRAULIC SYSTEM
6
3015R(h)/3515R(h)/4015R(h)/F36R(h)/F42R(h) TRACTOR
K25W6A51A
6. When pressing in the hydraulic cylinder case bushing,
select the correct size and use a pressing jig.
K25W6A52A
7. When installing the lift crank shaft and crank,
align their matching marks.
K25W6A53A
8. When installing the lift crank shaft and lift arm,
align their matching marks.
7LJKWHQLQJWRUTXH
aNJIFP
7LJKWHQLQJWRUTXH
aNJIFP
$
K25W6A54A
9. When installing the hydraulic cylinder cover,
apply liquid gasket (A) on it in advance.
K25W6A55A
10. When installing the hydraulic cylinder, apply LOCTITE
onitandfollowthespeciedtighteningtorque.
7LJKWHQLQJWRUTXH
aNJIFP
7LJKWHQLQJWRUTXH
aNJIFP
$
K25W6A56A
11. When installing the link, apply LOCTITE (A) on it
andfollowthespeciedtighteningtorque.
10 mm or longer
(for both sides)
Tightening torque
800 - 880 kgf.cm