- 60 -
Troubleshooting
message caused by what to do?
The test result is higher
than 33.3 mmol/L.
The test result is lower
than 0.6 mmol/L.
In case of doubt of blood test
result, check the meter with
control solution. With normal
result, re-test with blood sam-
ple two or three times. When
“HI” message persists, please
consult a doctor for assistance.
In case of doubt of blood test
result, check the meter with
control solution. With normal
result, re-test with blood sam-
ple two or three times. When
“Lo” message persists, please
consult a doctor for assistance.
Place the meter at the oper-
ating temperature range 10 -
40 °C (50 - 104 °F) for more
than 10 minutes and re-test.
The ambient temperature
is too high.
To Next Page
Loading...
