2
Series 70 Servo Pro
Operation and Maintenance Manual
1.1 Hazard-free Use
This device left the factory in proper condition to
be safely installed and operated in a hazard-free
manner. The notes and warnings in this document
must be observed by the user if this safe condition
is to be maintained and hazard-free operation of
the device assured.
Take all necessary precautions to prevent damage
to the Servo Pro due to rough handling, impact, or
improper storage. Do not use abrasive compounds
to clean the Servo Pro, or scrape its surfaces with
any objects.
Configuration and calibration procedures are
described in this document. Proper configuration
and calibration is required for the safe operation
of the Servo Pro.
The control system in which the Servo Pro is installed
must have proper safeguards to prevent injury to
personnel, or damage to equipment, should failure
of system components occur.
This document does not cover every detail about
every version of the product described. It cannot
take into account every potential occurrence in
installation, operation, maintenance and use.
If situations transpire that are not documented
in sufficient detail, please request the required
information from the Bray Distributor or
Representative responsible for your area.
1.2 Qualified Personnel
A qualified person in terms of this document is one
who is familiar with the installation, commissioning
and operation of the device and who has appropriate
qualifications, such as:
• Is trained in the operation and maintenance of
electric equipment and systems in accordance
with established safety practices
• Is trained or authorized to energize, de-energize,
ground, tag and lock electrical circuits and
equipment in accordance with established
safety practices
• Is trained in the proper use and care of personal
protective equipment (PPE) in accordance with
established safety practices
• Is trained in first aid
• In cases where the device is installed in a
potentially explosive (hazardous) location – is
trained in the operation, commissioning,
operation and maintenance of equipment in
hazardous locations
1.0 Safety Instructions - Definition of Terms
READ AND FOLLOW THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING
indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTICE
used without the safety alert symbol indicates a potential situation
which, if not avoided, may result in an undesirable result or state,
including property damage.
To Next Page
Loading...
Need help?
General
