USINGTHEDELAYTIMER
You can preset your Breadman ®Bread Baker to cook pre-programmed breads from
3 hours and 10 minutes to 15 hours in advance.
NOTE: Don't use the Timer if,your recipe includes eggs, fresh milk or other ingredients
that may spoil.
To preset your Breadman? follow these steps:
1. Add the ingredients as usual, taking care not to !et the yeast and liquid ingredients
contact one another.
2. If your recipe contains salt, please add salt with liquid ingredients, keeping it away
from the yeast. Salt may activate the yeast prematurely.
3. Close the Lid and plug it in.
4. Press the START/STOP button to clear display. Select the Baking Cycle.you want:
Basic: Normal or Rapid, 1-1/211o.or 2 lb., Light, Medium or Dark Crust;
French: Normal or Rapid, 1-1/21b. or 2 lb., Light, Medium or Dark Crust;
Fruit & Nut: Normal or Rapid, 1-1/21b. or 2 lb., Light, Medium or Dark Crust;
Whole Wheat: Normal or Rapid, 1-1/2116.or 2 lb., Light, Medium or Dark Crust;
Batter Bread, _MBake Only, Dough, Pizza Dough, Bagel Dough or Jam. The time
needed for the selected •Baking Cycle appears in the Display Window.
°
NOTE: The Delay Timer cannot be used for Fruit & Nut, Batter Bread, TMBake
Only, Dough, Pizza Dough, Bagel Dough or Jam.
Press the A Timer button once for each 10 minutes you want to add.
(Use the Y button to subtract time from the Timer. The amount of time
you set is shown in the Display Window.
r!.g .rl.O [1 0 O
_,t.s,,, Timer
Knead Rise Bake Complete
• For example, if it is 8 o'clock PMand you want a loaf of bread ready at 7 o'clock AM,
that is 11 hours from now, press the A Timer button until 11:00 appears on the display.
NOTE: Actual baking times will not change.
6. To check which setting you have chosen at any time during operation, press the
MENU button.
7. Press START button to begin the Timer. The LED display will flash, letting you
know the Timer is started'. When the Display Window indicates "0:00," baking
is complete&
8. If you make an error and _,ant to start over again, press and hold STOP button.
The Timer will clear and you can begin again.
19
To Next Page
Loading...
