PV 101+/PV 102+ Service Manual REMOVING/REPLACING THE MAIN COMPONENTS
Doc. No. 003259 En Issue: X-1 BREAS MEDICAL 3–3
3.3 Removing and replacing the CPU board
To remove the CPU board:
1 Remove the upper casing (See section 3.2).
2 Turn it upside down and remove the three Torx screws placed underneath the
CPU board.
3 Remove the CPU board.
To reassemble the CPU board:
• Reassemble in reverse order. Fit the components to the holes for the display
panel controls and screw the CPU board back in place.
To Next Page
Loading...
