DESCRIPTION
5
2 DESCRIPTION
The bare shaft set, if delivered separately, consists of a
support set (B) and a bare shaft kit (A). These two
components are packed separately. If the set is
delivered in a complete pump with pumphead and drive
a flexible coupling (C) is included.
The support set consists of two frame halves, an
adjustable drive support plate and a coupling guard.
The bare shaft kit consists of a shaft, a hub, a bearing
and a seal. No fasteners are provided for mounting the
drive or gearbox.
To align the pump and the drive use alignment jigs. The
jigs are not included in the package.
Destined for pump-
head
Support set (A) Bare shaft kit (B) Coupling size (C)
Bredel 40 Bredel 40 Bareshaft
Support Set
Bredel 40
Bareshaft Kit
48
To Next Page
Loading...
