Bresser 4Cast - Other Setting; Setting Alarm Time; Time, Date and General Setting

60
4.4 OTHER SETTING
4.4.1 TIME, DATE AND GENERAL SETTING
Press and hold the [ SET ] button for 2 seconds to enter the setting mode. Press [ / INDEX ] or [ /
MODE ] button to adjust, and press [ SET ] to proceed with next step of the setting. Please refer to following
setting procedures.
Step Mode Setting procedure
1
Hour
Press [
/ INDEX ] or [ / MODE ] key to adjust the hour
2
Minute
Press [
/ INDEX ] or [ / MODE ] key to adjust the minute
3
12/24 hour format
Press [
/ INDEX ] or [ / MODE ] key to select 12 or 24 hour format
4
Year
Press [
/ INDEX ] or [ / MODE ] key to adjust the year
5
Month
Press [
/ INDEX ] or [ / MODE ] key to adjust the month
6
Day
Press [
/ INDEX ] or [ / MODE ] key to adjust the day
7
M-D/D-M format
Press [
/ INDEX ] or [ / MODE ] key to select "Month / Day" or "Day /
Month" display format
8
Time sync ON/OFF
Press [
/ INDEX ] or [ / MODE ] key to enable or disable Time Sync
function.
If you want to set the time manually, you should set Time Sync OFF
9
Weekday language
Press [
/ INDEX ] or [ / MODE ] key to select weekday display language
NOTE:
- In normal mode, press [ SET ] key to switch between year and date display.
- During the setting, you can back to normal model by press and hold [ SET ] key for 2 seconds.
4.4.2 SETTING ALARM TIME
1. In normal time mode, press and hold [ ALARM ] key for 2 seconds until the alarm hour digit ashes to
enter alarm time setting mode.
2. Press [
/ INDEX ] or [ / MODE] key to change the value. Press and hold the key for quick-adjust.
3. Press [ ALARM ] key again to step the setting value to Minute with the Minute digit ashing.
4. Press [
/ INDEX ] or [ / MODE] key to adjust the value of the ashing digit.
5. Press [ ALARM ] key to save and exit the setting.
NOTE:
- In alarm mode, the “ ” icon will display on the LCD.
- The alarm function will turn on automatically once you set the alarm time.
4.4.2.1 ACTIVATING ALARM AND TEMPERATURE PRE-ALARM FUNCTION
1. In normal mode, press [ ALARM ] key to show the alarm time for 5 seconds.
2. When the alarm time displays, press [ ALARM ] key again to activate the alarm function. Or press [
ALARM ] key twice to activate the alarm with ice pre-alarm function.
Alarm o󰀨 Alarm on Alarm with ice-alert
NOTE:
Once the ice pre-alert activates, the pre-set alarm will sound and ice-alert icon will ash 30 minutes earlier
if the outdoor temperature is below -3°C.