Bresser T-REX2 - Slicing and Exporting 3 D Models; 3 D Model Structure Overview

www.bresser.de
11
1.1.2 Slicing and exporting a 3D model:
Slicer software is used to prepare 3D models for printing and converting them into
instructions for the 3D printer. REXprint is the slicer software for this 3D printer. With
REXprint, STL files can be converted to G or GX files for printing. These are then
transferred to the 3D printer via USB cable, USB stick or W-LAN.
1.1.3 Structure of the 3D model
After the output file is sent to the 3D printer, the printer begins to transfer the 3D
model into a physical object by applying layers of filament over each other.