Need help?Do you have a question about the Bresser T-REX2 and is the answer not in the manual?
General| Brand | Bresser |
|---|---|
| Model | T-REX2 |
| Category | 3D Printers |
| Language | English |
Details the three essential steps of 3D printing: model acquisition, slicing, and building.
Explains three methods for creating 3D models: design, scanning, and cloud download.
Describes the use of slicer software to prepare 3D models for printing.
Explains how the printer translates a 3D model into a physical object.
Provides a visual overview of the 3D printer's components with labels.
Lists and illustrates all included accessories for the BRESSER T-REX 2.
Defines key terms and components relevant to the 3D printer's operation.
Presents the technical specifications and data of the 3D printer.
Provides step-by-step visual instructions for safely unpacking the 3D printer.
Details the process of assembling the dual extruder onto the printer's mount.
Guides on mounting the coil holder and inserting the filament spool correctly.
Offers advice on proper filament spool alignment and guide tube insertion.
Instructions for installing or removing the printer's top cover.
Details how to fix the anti-oozing plate to the printer's nozzle area.
Explains the procedure for loading and unloading filament via the printer interface.
Describes how to start the platform leveling process using the touchscreen.
Guides on tightening leveling nuts to set the correct extruder-platform distance.
Details the steps for calibrating the Z-axis for optimal print results.
Ensures uniform alignment of both extruders along the X-axis.
Ensures uniform alignment of both extruders along the Y-axis.
Instructions for inserting the SD card into the printer for file access.
Guides on selecting and initiating a test print from the SD card.
Explains how to cool the printed model and platform for easier removal.
Provides instructions on using the scraper blade to detach prints from the platform.
Details the process of using water to loosen and remove PVA supports.
Describes rinsing the object with water to remove residual PVA.
Instructions for allowing the printed model to dry completely.
Provides guidance on the proper disposal of wastewater from PVA support removal.
Explains how to fine-tune print parameters for different filament types.
An introduction to the main print surface interface of the touchscreen.
Explains the requirement of an inserted SD card for printing operations.
Guides on adjusting extruder and platform temperatures via the touchscreen.
Describes how to pause printing or replace filament during operation.
Explains how to start the preheating process for the printer.
Guides on how to stop the preheating process and return to the main screen.
Overview of the main tabs available in the REXprint tool interface.
Details the interface for managing filament loading and unloading.
Explains the process of manually adjusting the platform's flatness.
Directs users to Chapter 2.3.3 for detailed calibration information.
Explains that manual fine calibration is intended for experienced users.
Guides on adjusting extruder positions in expert mode for better alignment.
Instructions for adjusting X-axis calibration for the left extruder's printing alignment.
Instructions for adjusting Y-axis calibration for the right extruder's printing alignment.
Details the display of XYZ coordinates and temperature in the Status section.
Indicates where basic device information, such as firmware version, is located.
Explains that basic device information is shown in the 'Info' section.
Details the procedure for updating firmware using an SD card.
Explains how to update firmware using a USB cable and REXprint.
Provides instructions on how to install the REXprint slicing software.
Explains the two methods for acquiring the REXprint software package.
Guides on extracting files and starting the REXprint software for the first time.
Guides on selecting the correct printer model within the REXprint application.
Describes the main menus and icons available in the REXprint interface.
Explains the process of loading 3D models into the REXprint software.
Details the options available for printing models directly or exporting them.
Details six distinct methods for loading files into the REXprint software.
Guides on designing reliefs by converting images into STL format within REXprint.
Explains methods for moving, rotating, and scaling model views.
Guides on how to choose from various predefined views of the 3D model.
Describes how to reset the model view to its default or home position.
Explains how to move models in the XY and Z directions using mouse dragging.
Guides on moving models by entering specific distance values.
Explains rotating models using mouse-operated rings around the object.
Guides on rotating models by entering specific angle values for axes.
Explains scaling models by dragging with the mouse after selecting the Scale icon.
Guides on scaling models by entering specific value inputs for axes.
Explains how to cut models by drawing a plane with the mouse.
Guides on cutting models along the X-plane.
Guides on cutting models along the Y-plane.
Guides on how to access the support settings menu by clicking the icon.
Details selecting between 'Treelike' and 'Linear' support structures.
Guides on accessing the print screen and setting parameters for a print job.
Guides on how to create a new, empty project file in REXprint.
Details the methods for saving projects and models in various formats.
Guides on how to undo the last performed editing action.
Explains how to redo an action that was previously undone.
Details how to clear the undo stack to free up memory space.
Details the steps required to update the printer's firmware.
Provides a brief introduction to the software's basic functions.
Guides on how to access the comprehensive help documentation.
Details how to check for the latest available software updates online.
Explains where to find information about the REXprint software version and copyrights.
Explains how to select the correct printer model for creating .g files.
Details the advanced functions available in REXprint's expert mode.
Describes how to access and use the parameter settings window for printing.
Guides on selecting extruders for mirror or duplicate printing modes.
Guides on resolving issues related to extruder head misalignment.
Troubleshooting steps for problems with PLA extrusion and bed adhesion.
Provides solutions for when the printer freezes before starting a print job.
Addresses common print issues like poor adhesion and incorrect Z-offset.
Details the warranty period, coverage, exclusions, and terms.
To Next Page
