www.bresser.de
Introduction
Note: Each unit is subjected to a factory test before shipment. Residues on the
extruder or the smallest of scratches on the construction tape are normal and have
no influence on the print quality.
Bresser GmbH would like to take this manual as an opportunity to thank both the
technicians of Bresser GmbH and the users of this 3D printer for their tireless efforts
and extremely important support.
This Bresser GmbH Saurus user manual is intended for the users of Saurus who are
now starting their journey into the future of printing with Bresser GmbH Saurus. Even
if you are familiar with the older models of Bresser GmbH equipment or 3D printing
technology, we recommend that you read this manual. It contains a lot of important
information for you to know regarding Saurus and to improve your 3D experience:
(1) BRESSER T-REX 2 Quick Start Guide
The Quick Start Guide is included with the printer. The information it contains will
help you start printing in no time.
(2) BRESSER REX-II product page on the Internet
Visit the product page on the Internet at www.bresser.de/P2010600 for additional
information, available updates or software for this printer and related accessories.
To Next Page
Loading...
