www.bresser.de
Safety Instructions
IMPORTANT NOTE!
Familiarise yourself with this manual and read all the instructions it contains before
you start setting up and operating the machine. Failure to heed warnings and
instructions may result in personal injury, fire, and damage to the unit or other
property.
STRICTLY FOLLOW ALL SAFETY AND OTHER INSTRUCTIONS GIVEN IN THIS
MANUAL AT ALL TIMES!
Safety in the working environment
① Keep the workplace clean!
② Do not operate the 3D Printer in the presence of flammable liquids, gases or
dust.
③ Keep children and untrained persons away from the 3D printer.
Security of power supply
① Operate the 3D Printer only from an earthed power outlet. Do not make any
changes to the power plug of the 3D Printer.
② Do not operate the 3D printer in a hazy or humid environment. Do not expose
the 3D printer to direct sunlight.
③ Do not use the power cable for any purpose other than its intended use.
④ Do not operate the unit during thunderstorms.
⑤ To avoid accidents, disconnect the device from the power supply if you are not
going to use it for a long period of time.
Safety of people
① Do not touch the nozzle or pressure plate during printing.
② Do not touch the nozzle after printing is completed.
③ Wear suitable clothing. Do not wear loose clothing or loose-fitting jewellery. Make
sure that your hair, clothing and gloves do not come into the vicinity of moving
parts.
④ Do not operate the device if you are tired or under the influence of drugs, alcohol
or medication.
To Next Page
Loading...
