13
Filter Replacement Schedule
Filter Type Replacement Schedule Function
Sediment 6 months or 950 gallons
Performs a coarse filtration of original
water. Removes mud, sand, iron, rust,
and suspensions, and impurities.
Pre-Carbon 6 months or 950 gallons
Reduces chlorine, taste and odor, lead
and cysts.
Reverse Osmosis
(RO)
6 months or 1,900 gallons
Removes up to 99% of contaminants
including arsenic, lead, fluoride, heavy
metals and more.
Post Carbon 6 months or 950 gallons Taste and impurity removal.
Replace the Filters
IMPORTANT: Only replace the filters with new filters designed for this dispenser. Any other type of filter will
damage the machine and void any warranty.
When a filter is approaching the end of its life, the filter reset switch (19) flashes red. To change filters:
1. Shut off the water supply.
2. Remove the old lters and replace with new lters. Ensure the sediment lter is on the left and the carbon block
lter is on the right.
3. To ush your new lters, follow the instructions in Step 5 ‑ Flush the Filters and Complete the Installation.
4. Press and hold the lter reset switch (19) until the red indicator light turns off to reset the internal timer.
Filter Specifications
Sediment Filter Pre-Carbon Filter
(Sediment, Dirt, and Rust Removal) (Chlorine, Taste, and Odor Reduction)
Filter Capacity
950 Gallons
Filter Capacity
950 Gallons
Flow Rate
0.8 GPM
Flow Rate
0.8 GPM
Suggested PSI
14.5 - 58 psi
Suggested PSI
14.5 - 58 psi
Temperature
33 - 100 °F
Temperature
33 - 100 °F
RO Filter Post Carbon Filter
(Reduce Impurities to 0.0001 Micron) (Taste and Impurity Removal)
Filter Capacity
1,900 Gallons
Filter Capacity
950 Gallons
Flow Rate
0.035 GPM
Flow Rate
0.8 GPM
Suggested PSI
58 - 116 psi
Suggested PSI
14.5 - 58 psi
Temperature
33 - 100 °F
Temperature
33 - 100 °F
To Next Page
Loading...
Need help?
General
