EasyManua.ls Logo

Briot ALTA EVOLUTION Blocker - Lithium Battery

Default Icon
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ALTA EVOLUTION
/
EVOLUTION
GT
User
Manual
2.1. SAFETY
2.1.1. O
P
ERATOR
Read the instructions carefully and always keep the CD-Rom containing the user manual near the machine in order
to be able to refer to it easily
> Before carry out any work on the machine, check that the mains cable is unplugged.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.
2.1.2. MACHINE
Make sure your voltage source corresponds to the voltage specified on the identification plate located at the rear of
the machine. If you are unsure of the type of current available in your premises, contact your electricity company.
If the machine is not going to be used for a long period of time, disconnect the power cords from the wall outlet.
Disconnect the machine if there is an electrical storm or when the machine is left unattended for a long period.
It must be positioned so that the way to disconnect it from the power supply is easily accessible. The disconnecting
mean is the cord plug/appliance coupler of the device.
No liquids must be placed near the power supply and/or its cable.
Never replace detachable mains supply cords with inadequately rated cords.
Keep the machine away from any source of heat. A radiator is a heat source which can be detrimental to the correct
operation of the machine.
The openings in the cover are designed to ventilate the machine and contribute to its normal operation. Do not
obstruct them or cover them.
Make sure that the machine is installed in a correctly ventilated room.
Do not overload the wall sockets or plugs because you would increase the risk of fire or electric shock.
Avoid using electric extension leads.
Keep the machine away from any source of dust.
Any work carried out on the machine (with the cover open or closed) must be undertaken by a Briot technician.
Do not place your hands in the hazardous area during the machine’s mechanical movements.
2.1.3. LITHIUM BATTERY
The replacement of the battery (Type: cURus CR2032 lithium battery) can only be performed by a trained service
technician
CAUTION: there is a risk of explosion if the battery is replaced by an incorrect type. Do not discard used batteries as
normal waste, but dispose of them in a battery recycling centre.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGE CAUSED BY ANY USE OF THE MACHINE WHICH DOES NOT
COMPLY WITH THE INSTRUCTIONS IN THIS MANUAL OR DISPLAYED ON THE MACHINE ITSELF.
2-2
ALTA EVOLUTION / EVOLUTION GT