ALTA EVOLUTION / EVOLUTION GT … User manual
1
ALTA EVOLUTION / EVOLUTION GT
MODIFYING A SHAPE - DIGIFORM FUNCTION 3.3.9.
In some cases the pattern used for drilled frames or nylor frames does not match the required shape.
The Digiform function allows any initial shape to be changed into a new pattern.
For this purpose, follow this procedure:
Switch over to the Digiform screen.
You have two adjustment possibilities:
Padlock closed: Changes to values (height or width) applied proportionally to the whole shape (in green).
Padlock open: Changes to values applied non-proportionally to the initial shape (in green).
To Next Page
Loading...