Bristol 871A - Page 45

Model 871A User’s Manual REMOTE COMMUNICATIONS
Bristol Instruments, Inc. 45
*OPC?
Description
The *OPC (operation complete) query returns 1 when all pending
device operations are complete, 0 if an operation is pending.
Query Response
{0 | 1}
*RCL
Description
The *RCL (recall) command restores instrument settings.
*RST
Description
The *RST (reset) command returns the instrument’s settings to a
known state.
Commands Affected by *RST
COMMAND
SETTING AFTER AN *RST COMMAND
:CALCulate:DELTa:METHod
STARt
:SENSe:AVERage:COUNt
2
:SENSe:AVERage:STATe
OFF
:SENSe:CALIbrate:METHod
TEMPerature
:SENSe:CALIbrate:TEMPerature
5
:SENSe:CALIbrate:TIMer
30
:SENSe:DETector:FUNCtion
CW
SENSe:PID:STATe
OFF
:SENSe:PID:LCONstants:PROPortional
1
:SENSe:PID:LCONstants:INTegral
0.0
:SENSe:PID:LCONstants:DERivative
0.0
:SENSe:PID:VOLTage:DEFault
-5.0
:SENSe:PID:VOLTage:MINimum
-5.0
:SENSe:PID:VOLTage:MAXimum
5.0
:SENSe:PID:VOLTage:OFFset
0.0
:SENSe:PID:VOLTage:SCALe
1.0
:SENSe:EXPOsure:AUTO
OFF
:TRIGger:SEQuence:METHod
INT
:TRIGger:SEQuence:RATE
1000