Britax EMBLEM - Fastening the Harness Buckle; Fastening the Chest Clip

21
EMBLEM/ALLEGIANCE Canadian User Guide
7. Fasten the harness
buckle.
NOTE: After inserting
each buckle tongue, listen
for a click to help ensure
proper connection.
8. Check for proper harness
height and pull any
excess slack up to the
child’s shoulder area
before tightening.
9. Pull the harness adjuster
strap to tighten the
harness.
IMPORTANT: The
harness should have a
snug fit around the child.
A snug strap should not
allow any slack. It lies in
a relatively straight line
without sagging. It does
not press on the child’s
flesh or push the child’s
body into an unnatural
position. You should not
be able to pinch excess.
10. Fasten the chest clip and
place at armpit level.
Before traveling, verify that the:
9 Harness straps are not twisted.
9 Harness is snug.
9 Buckle is fastened.
9 Chest clip is at the child’s armpit level.
9 Remove bulky coats, jackets and/or bulky sports
equipment before putting the child in the child seat.
Pull the harness adjuster
strap away from the child seat
to tighten�
Do not pull sideways�